Fotografia produsului are caracter informativ
6200-2RSH+SKF
Date tehnice produs
6200-2RSH - Deep groove ball bearing with seals
Deep groove ball bearing with seals Single row deep groove ball bearings with seals on one or both sides are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
Bore diameter10 mmBore diameter
Outside diameter30 mmOutside diameter
Width9 mmWidth
Basic dynamic load rating5.4 kNBasic dynamic load rating
Basic static load rating2.36 kNBasic static load rating
Limiting speed17000 r/minLimiting speed
Prezentare produs
| Cod produs | 6200-2RSH |
|---|---|
| Tip produs | Deep groove ball bearing with seals |
| Marca | SKF |
Dimensions
| Bore diameter | Bore diameter | 10 mm |
| Outside diameter | Outside diameter | 30 mm |
| Width | Width | 9 mm |
Performance
| Basic dynamic load rating | Basic dynamic load rating | 5.4 kN |
| Basic static load rating | Basic static load rating | 2.36 kN |
| Limiting speed | Limiting speed | 17000 r/min |
| SKF performance class | SKF performance class | SKF Explorer |
Properties
| Filling slots | Filling slots | Without |
| Number of rows | Number of rows | 1 |
| Locating feature, bearing outer ring | Locating feature, bearing outer ring | Without |
| Bore type | Bore type | Cylindrical |
| Cage | Cage | Sheet metal |
| Matched arrangement | Matched arrangement | No |
| Radial internal clearance | Radial internal clearance | CN |
| Material, bearing | Material, bearing | Bearing steel |
| Coating | Coating | Without |
| Sealing | Sealing | Seal on both sides |
| Sealing type | Sealing type | Contact |
| Lubricant | Lubricant | Grease |
| Relubrication feature | Relubrication feature | Without |
| Indicative carbon footprint for new product | Indicative carbon footprint for new product | 0.12 kg CO2e |
Logistics
| Product net weight | Product net weight | 0.032 kg |
| eClass code | eClass code | 23-05-08-01 |
| UNSPSC code | UNSPSC code | 31171504 |
Dimensions
| d | Bore diameter | 10 mm mm |
| tΔdmp | Deviation limits of mid-range bore diameter | -0.007 ... 0 mm mm |
| D | Outside diameter | 30 mm mm |
| tΔDmp | Deviation limits of mid-range outside diameter | -0.008 ... 0 mm mm |
| B | Width | 9 mm mm |
| tΔBs | Deviation limits of ring width | -0.06 ... 0 mm mm |
| d2 | Recess diameter | ≈ 15.07 mm mm |
| D2 | Recess diameter | ≈ 24.72 mm mm |
| r1,2 | Chamfer dimension | min. 0.6 mm mm |
| ISO tolerance class for dimensions | ISO tolerance class for dimensions | P6 and tighter width tolerance |
Abutment dimensions
| da | Diameter of shaft abutment | min. 14.2 mm mm |
| da | Diameter of shaft abutment | max. 15 mm mm |
| Da | Diameter of housing abutment | max. 25.8 mm mm |
| ra | Radius of shaft or housing fillet | max. 0.6 mm mm |
Calculation data
| SKF performance class | SKF performance class | SKF Explorer |
| C | Basic dynamic load rating | 5.4 kN kN |
| C0 | Basic static load rating | 2.36 kN kN |
| Pu | Fatigue load limit | 0.1 kN kN |
| Limiting speed | Limiting speed | 17000 r/min r/min |
| kr | Minimum load factor | 0.03 |
| f0 | Calculation factor | 13 |
Tolerances of run-out
| tKia | Range of section height at inner ring of assembled bearing | 4 µm µm |
| tSd | Maximum run-out of inner ring side face to the bore | 7 µm µm |
| tSia | Maximum axial run-out of inner ring of assembled bearing | 7 µm µm |
| tKea | Range of section height at outer ring of assembled bearing | 6 µm µm |
| tSD | Perpendicularity of outer ring outside surface | 4 µm µm |
| tSea | Maximum axial run-out of outer ring of assembled bearing | 8 µm µm |
| ISO tolerance class for geometrical tolerances | ISO tolerance class for geometrical tolerances | P5 |